Early Autumn - Apple and Cinnamon

New VapeSafe Early Autumn eLiquid.

Early Autumn - Apples and Cinnamon flavored eLiquid evokes memories of the beginning of fall. The feel of the warm autumn sun on the skin. The sight of vibrant hues of amber and crimson leaves hanging in gently swaying trees soaking up the light. The rustling sound of the breeze slipping through the tree branches tugging and teasing the remaining leaves into releasing their hold and floating downward. The laughing children raking the leaves into piles and then running and jumping into the soft, luscious piles scattering the leaves again. The delicious smells of baking apple and cinnamon pies wafting through open windows. These are the sights, smells and tastes of Early Autumn.

Early Autumn eLiquid by VapeSafe captures the essence of Autumn no matter what season it is. Early Autumn eLiquid is flavorful combination of apples and cinnamon. As with all of the VapeSafe eLiquids, our mixtures are designed to produce nice, heavy vapors and the most succulent flavors. Try Early Autumn eLiquid today!

Early Autumn - Apples and Cinnamon eLiquid


Technology Information:


Configuring CCNA DHCP On A Cisco Router Part 1

DHCP (Dynamic Host Configuration Protocol)

By: Joe Spoto

RFC 2131, DHCP offers IP address and other parameters to IP hosts.

DHCP is a server/client setup were DHCP Clients are given network addresses and other configuration parameters to dynamically configured hosts.

DHCP supports three mechanisms for IP address allocation:

• Static/Automatic allocation — DHCP Server leases a permanent IP address to a DHCP client.

• Dynamic allocation—DHCP Server leases an IP address to a DHCP client for a limited period of time or until the DHCP client gives up the IP address information

• Reserved / Manual allocation—Here the network administrator manually reserves and assigns an IP address to a DHCP client and the Server DHCP conveys the assigned address to the DHCP client.

As a CCNA student you are expected to know how to configure all options

DHCP messages re formatted based on the Bootstrap Protocol (BOOTP) message. Using this format ensures support for the BOOTP relay agent functionality and interoperability between BOOTP clients and DHCP Servers.

We use relay agents to eliminate to setup a unique DHCP Server on each subnet/VLAN or physical network segment.

By default, Cisco routers running Cisco IOS software include DHCP server and relay agent software.

=============

DHCP Server Overview

Cisco have deveploed for their IOS a full DHCP Server implementation which will assigns and manages IP addresses from administratively specified address pools configured on your router to DHCP clients.

Even if the Cisco Router cannot assign IP addresses to a DHCP client it can be configured to forward the request to one or more DHCP Servers once again manually configured by the network administrator.

The four basic steps that occur when a DHCP client requests an IP address from a DHCP Server.

A. The client sends a DHCPDISCOVER broadcast message to locate a DHCP Server.

B. A DHCP Server offers configuration parameters (such as an IP address, a MAC address, a domain name, and a lease for the IP address) to the client in a DHCPOFFER unicast message.

C. A DHCP client might be offered IP host information from many DHCP Servers. The client could accept any of these offers, but the will normally accept the very first offer it receives.

Note: Any offer from the DHCP Server is not a guaranteed until the DHCP client has had a chance to formally request the address but the server will normally reserves the address until the client does request it

D. The DHCP client then returns a formal request for the offered IP address to the DHCP Server in a DHCPREQUEST broadcast message.

E. In return the DHCP Server will confirm that the IP address has been allocate d to the client by returning a DHCPACK unicast message to the client.  The reason that the request for the offered IP address (the DHCPREQUEST message) which is issued by the DHCP client is sent as a broadcast is so that every other DHCP Server which may have received the initial  DHCPDISCOVER broadcast message from the client can now reclaim the IP addresses that they had offered to the DHCP client.

In the event that the configuration parameters which were initially offered by the DHCP server to the DHCP client in the DHCPOFFER unicast message are invalid; say a misconfiguration error exists, the DHCP client will returns a DHCPDECLINE broadcast message to the DHCP Server.

When the DHCP Server receives the DHCPDECLINE it will then issue to the DHCP client a DHCPNAK denial broadcast message, this means the originally offered configuration parameters will not be assigned. In the event that an error occurrs during the negotiation of the IP configuration parameters or the DHCP client has taken too long in reply to the DHCPOFFER message the DHCP Server will assign the parameters to another DHCP client of the DHCP Server.

As a CCNA student you are expected to know understand all options

Why use a the DHCP server features on the Router?

• Trackable cost savings

By deploying the DHCP client on the outside interface on each remote site router will reduce internet costs. Static IP addresses are more costly to purchase than to use dynamically acquired addresses

• Less client configuration and centralised management

DHCP is very simple to setup on clients

Because the DHCP Server supports all of the DHCP client configurations for all sbnets several subnets, you only need to manage a single, central server when you need to make configuration parameter changes.

Before you start to configure configure the Cisco DHCP Server features on the router you will need to complete the following steps

  1. Determine which subnets and IP addresses that you will setup on the DHCP Server for it to assign along with which IP addresses that are to be excluded.
  1. Default routers
  1. Domain Name System (DNS) servers
  1. Decide on a DNS domain name.

As a CCNA student you are expected to know how to configure all options

About the Author

Joe Spoto is a senior lecturer at Commsupport networks CCNA training. in the United Kingdom. Joe teaches Cisco CCNA, CCNP, CCVP courses when he is not out on the road fixing and building networks, if you want to find out more about what we do at Commsupport please visit us at CCNA Course. Commsupport run free one day training sessions and free on-line webi nars, CCNA training.

Related All